Valspar® One-Coat Solid Stain & Sealer

This one-coat solid stain and sealer offers maximum sunblocking protection while adding a richly colored coating for ultimate coverage and durability.

• All-weather defense in one coat
• Rain-ready in four hoursUV defense against fading
• Available in a wide variety of colors
• Provides a mold- and mildew- resistant finish
• 10-year protection on decks, 25 years on fences & siding

HOW TO USE

Usage

New or reconditioned wood decks, porches, outdoor furniture, steps, railings, fences and siding.

Prep

In order to be effective, a stain must be able to adhere. Surfaces must be sound and may be dry or damp. If damp, the wood should be free of puddles and not feel wet. Be sure surface is free of all dirt, mildew stains, loose wood fibers and other foreign matter. Old loose stain should be scraped off and the edges sanded smooth for proper adhesion. Prepare previously stained or weathered surfaces with Valspar® Wood Cleaner to remove dirt and mildew stains or Valspar® All-In-One Wood Prep to revive extremely weathered surfaces. Scrubbing with a stiff bristle brush is required to completely remove all dirt and debris.

Application

Apply with nylon or polyester brushes, stain pads or professional spray equipment. When spraying, always back-brush immediately. To ensure desired appearance and proper drying time, always finish a small test area before proceeding. Do not overapply. Shake and stir thoroughly before and during use. If project requires more than 1 container, blend all containers together to ensure uniformity. Apply to small sections at a time (1–3 boards); start at one edge of the board and work end-to-end, following through to the end of the boards to avoid lap marks.

Dry Time

Dry Time @ 77 °F and 50 % Relative Humidity
To The Touch: 4 hour - 24 hour
Recoat: 2 hour - 4 hour

Clean-up & Disposal

Clean brushes and equipment with soap and water. Dispose of empty container or unused portion in accordance with local, state and federal regulations.